Command Reference Guide

System Time and Date | 1445
Example
(detail)
FTOS#show clock detail
12:18:10.691 UTC Wed Jan 7 2009
Time source is RTC hardware
Summer time starts 02:00:00 UTC Sun Mar 8 2009
Summer time ends 02:00:00 ABC Sun Nov 1 2009
FTOS#
Related
Commands
show ntp associations
c e s
Display the NTP master and peers.
Syntax
show ntp associations
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ntp associations
remote ref clock st when poll reach delay offset disp
==========================================================================
10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
*172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9 104.16
172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
* master (synced), # master (unsynced), + selected, - candidate
FTOS#
clock summer-time recurring Display the time and date from the switch hardware clock.
show calendar Display the time and date from the switch hardware clock.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Table 53-1. show ntp associations Command Fields
Field Description
(none) One or more of the following symbols could be displayed:
• * means synchronized to this peer
• # means almost synchronized to this peer
• + means the peer was selected for possible synchronization
• - means the peer is a candidate for selection
• ~ means the peer is statically configured
remote Displays the remote IP address of the NTP peer.
ref clock Displays the IP address of the remote peer’s reference clock.