Command Reference Guide

1440 | System Time and Date
www.dell.com | support.dell.com
Related
Commands
ntp broadcast client
c e s
Set up the interface to receive NTP broadcasts from an NTP server.
Syntax
ntp broadcast client
To disable broadcast, enter no ntp broadcast client.
Defaults
Disabled
Command Modes
INTERFACE
Command
History
ntp disable
c e s
Prevent an interface from receiving NTP packets.
Syntax
ntp disable
To re-enable NTP on an interface, enter no ntp disable.
Default
Disabled (that is, if an NTP host is configured, all interfaces receive NTP packets)
Command Modes
INTERFACE
Command
History
ntp multicast client
e
Configure the switch to receive NTP information from the network via multicast.
ntp authenticate Enables NTP authentication.
ntp trusted-key Configure a trusted key.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series