Command Reference Guide

Spanning Tree Protocol (STP) | 1419

Spanning Tree Protocol (STP)

Overview

The commands in this chapter configure and monitor the IEEE 802.1d Spanning Tree

protocol (STP) and are supported on the Dell Force10 switch/routing platforms, as indicated

by the

characters under the command headings: e E-Series, c C-Series, s S-Series, or

Commands

• bridge-priority

• debug spanning-tree

• description

• disable

• forward-delay

• hello-time

• max-age

• protocol spanning-tree

• show config

• show spanning-tree 0

• spanning-tree 0

bridge-priority

c e s

Set the bridge priority of the switch in an IEEE 802.1D Spanning Tree.

Syntax

bridge-priority {priority-value | primary | secondary}

To return to the default value, enter

no bridge-priority.