Command Reference Guide

Storm Control | 1411
Example
(E-Series)
FTOS#show storm-control broadcast gigabitethernet 11/11
Broadcast storm control configuration
Interface Direction Percentage Wred Profile
--------------------------------------------------------------
Gi 11/11 Ingress 5.6
Gi 11/11 Egress 5.6 -
FTOS#
Example
(C-Series)
FTOS#show storm-control broadcast gigabitethernet 3/24
Broadcast storm control configuration
Interface Direction Packets/Second
-----------------------------------------------
Gi 3/24 Ingress 1000
FTOS#
show storm-control multicast
c s
Display the storm control multicast configuration.
Syntax
show storm-control multicast [interface]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
interface
(OPTIONAL) Enter one of the following interfaces to display the interface specific
storm control configuration.
• For Fast Ethernet, enter the keyword Fastethernet followed by the slot/port
information.
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed
by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the
slot/port information.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series and S-Series