Command Reference Guide

Simple Network Management Protocol and Syslog | 1389
Command
History
Usage
Information
When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the
buffer size does not affect messages stored in the buffer.
Related
Commands
logging console
c e s z
Specify which messages are logged to the console.
Syntax
logging console
[level]
To return to the default values, enter default logging console. To disable logging to the
console, enter
no logging console.
Parameters
Defaults
7 or debugging
Command Modes
CONFIGURATION
Command
History
Related
Commands
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
clear logging Clear the logging buffer.
default logging
buffered
Returns the logging buffered parameters to the default setting.
show logging Display the logging setting and system messages in the internal buffer.
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters:
emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging.
Default: 7 or debugging.
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
clear logging Clear logging buffer.
default logging console Returns the logging console parameters to the default setting.
show logging Display logging settings and system messages in the internal buffer.