Command Reference Guide

1358 | sFlow
www.dell.com | support.dell.com
sflow enable (Global)
c e s
Enable sFlow globally.
Syntax
sflow enable
To disable sFlow, use the no sflow enable command.
Defaults
Disabled.
Command Modes
CONFIGURATION
Command
History
Usage
Information
sFlow is disabled by default. In addition to this command, sFlow needs to be enabled on
individual interfaces where sFlow sampling is desired.
Related
Commands
sflow enable (Interface)
c e s
Enable sFlow on Interfaces.
Syntax
sflow enable
To disable sFlow, use the no sflow enable command.
Defaults
Disabled.
Command Modes
INTERFACE
Command
History
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduces on S-Series Stacking
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 6.2.1.1 Introduced on E-Series
sflow enable (Interface) Enable sFlow on Interfaces.
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduces on S-Series Stacking
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 6.2.1.1 Introduced on E-Series