Command Reference Guide

Control and Monitoring | 135
Defaults
None
Command Mode
EXEC
EXEC Privilege
Command
History
Example
(S-Series)
FTOS#show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM 0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
RTM 0 0x00000000 0x00000000 0x800010ff 0x01930000 43
VRRP 0 0x00000000 0x00000000 0x803330f3 0x00400000 39
L2PM 0 0x00000000 0x00000000 0x87ff79ff 0x0e032200 45
ACL 0 0x00000000 0x00000000 0x867f50c3 0x000f0218 44
OSPF 0 0x00000dfa 0x00400098 0x00000000 0x00000000 0
PIM 0 0x000000f3 0x00030000 0x00000000 0x00000000 0
IGMP 0 0x000e027f 0x00000000 0x00000000 0x00000000 0
SNMP 0 0x00000000 0x00000000 0x800302c0 0x00000002 30
EVTTERM 0 0x00000000 0x00000000 0x800002c0 0x00000000 29
MRTM 0 0x00000000 0x00000200 0x81f7103f 0x00000000 38
DSM 0 0x00000000 0x00000000 0x80771003 0x00000000 32
LACP 0 0x00000000 0x00000000 0x8000383f 0x00000000 35
DHCP 0 0x00000000 0x00000000 0x800000c2 0x0000c000 37
V6RAD 0 0x00000433 0x00030000 0x00000000 0x00000000 0
Unidentified Client0 0x006e0002 0x00000000 0x00000000 0x00000000 0
FTOS#
show switch links
c
View the switch fabric backplane or internal status.
Syntax
show switch links {backplane | internal}
Parameters
Defaults
None
Command Modes
EXEC
Command
History
Example
FTOS# show switch links backplane
trace-flags
Enter the keyword trace-flags to display IFM information for internal trace
flags.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 7.6.1.0 Introduced for C-Series and S-Series.
backplane
Enter the keyword backplane to view a table with information on
the link status of the switch fabric backplane for both SFMs.
internal
Enter the keyword internal to view a table with information on the
internal status of the switch fabric modules.
Version 7.5.1.0 Introduced on C-Series