Command Reference Guide

Security | 1343
Defaults
Not configured.
Command Modes
TRACE LIST
Command
History
Related
Commands
show config
e
View the current IP trace list configuration.
Syntax
show config
Command Modes
TRACE LIST
Example
FTOS(config-trace-acl)#show config
!
ip trace-list suzanne
seq 5 deny tcp any any
FTOS(config-trace-acl)#
show ip accounting trace-lists
e
View the trace lists created on the switch and the sequence of filters.
Syntax
show ip accounting trace-lists
[trace-list-name [linecard number]]
Parameters
Command Modes
EXEC
count
(OPTIONAL) Enter the keyword count to count packets
processed by the filter.
byte
(OPTIONAL) Enter the keyword byte to count only bytes
processed by the filter.
log
(OPTIONAL) Enter the keyword log to have the information kept
in a Trace-list log file.
Version 7.4.1.0 Deprecated established keyword — not supported on TeraScale
line cards.
deny Configure a filter to drop packets.
permit Configure a filter to forward packets.
trace-list-name
(OPTIONAL) Enter the name of the trace list to be displayed.
linecard number (OPTIONAL) Enter the keyword linecard followed by the line card number
to view the Trace list information on that line card.
C-Series and S-Series Range: 0 to 7 on the C300
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.