Command Reference Guide

1318 | Security
www.dell.com | support.dell.com
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
show dot1x interface
c e s
Display the 802.1X information on an interface.
Syntax
show dot1x interface interface
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC privilege
Command
History
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
interface
Enter one of the following keywords and slot/port or number information:
• For a Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a Fast Ethernet interface, enter the keyword FastEthernet followed by
the slot/port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the
slot/port information.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series