Command Reference Guide

126 | Control and Monitoring
www.dell.com | support.dell.com
IFMGR0 EVENTTERMLOG0 0 1 0 0 1 1 8 8
IFMGR0 SNMP0 0 1 0 0 1 1 8 8
IFMGR0 IPMGR0 0 7 0 0 9 9 8 8
IFMGR0 DIFFSERV0 0 2 0 0 3 3 8 8
DIFFSERV0 ACL_AGENT0 0 0 0 0 0 0 100 100
!---------------output truncated --------------------------!
Usage
Information
The Single Window Protocol (SWP) provides flow control-based reliable communication
between the sending and receiving software tasks.
Important Points to Remember
• A sending task enqueues messages into the SWP queue3 for a receiving task and
waits for an acknowledgement.
• If no response is received within a defined period of time, the SWP timeout
mechanism resubmits the message at the head of the FIFO queue.
• After retrying a defined number of times, the following timeout message is
generated:
SWP-2-NOMORETIMEOUT
• In the display output in the example above, a retry (Retries) value of zero
indicates that the SWP mechanism reached the maximum number of
retransmissions without an acknowledgement.
show processes memory (C-Series and E-Series)
c e
View memory usage information based on processes running in the system.
Syntax
show processes memory [cp | lp slot-number {lp all | lp summary} | rp1 | rp2]
Parameters
Command Modes
EXEC
cp
(OPTIONAL) Enter the keyword cp to view memory usage of the Control
Processor.
lp slot-number (OPTIONAL) Enter the keyword lp and the slot number to view information
on the line-card processor in that slot.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200/E1200i, 0 to 6 on a E600/E600i, and 0 to
5 on a E300.
lp all (OPTIONAL) Enter the keyword lp all to view CP memory usage on all
active line cards.
lp summary (OPTIONAL) Enter the keyword lp summary to view a summary of the line
card CP memory usage.
rp1
(OPTIONAL) Enter the keyword rp1 to view memory usage of the Route
Processor 1.
Note: This option is supported on the E-Series only.
rp2
(OPTIONAL) Enter the keyword rp2 to view memory usage of the Route
Processor 2.
Note: This option is supported on the E-Series only.