Command Reference Guide

1258 | Remote Monitoring (RMON)
www.dell.com | support.dell.com
Defaults
owner
Command Modes
CONFIGURATION
Command
History
show rmon
c e s z
Display the RMON running status including the memory usage.
Syntax
show rmon
Defaults
No default behavior
Command Modes
EXEC
Command
History
Example
FTOS# show rmon
RMON status
absolute
Enter the keyword absolute to test each MIB variable directly. This
is the alarmSampleType in the RMON Alarm table.
rising-threshold value
event-number
Enter the keyword rising-threshold followed by the value (64 bit)
the rising-threshold alarm is either triggered or reset. Then enter the
event-number to trigger when the rising threshold exceeds its limit.
This value is the same as the alarmRisingEventIndex or alarmTable
of the RMON MIB. If there is no corresponding rising-threshold
event, the value is zero.
falling-threshold value
event-number
Enter the keyword falling-threshold followed by the value (64 bit)
the falling-threshold alarm is either triggered or reset. Then enter the
event-number to trigger when the falling threshold exceeds its limit.
This value is the same as the alarmFallingEventIndex or the
alarmTable of the RMON MIB. If there is no corresponding
falling-threshold event, the value is zero.
owner string
(OPTIONAL) Enter the keyword owner followed the owner name to
specify an owner for the alarm. This is the alarmOwner object in the
alarmTable of the RMON MIB.
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.1.1.0 Introduced for E-Series
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.1.1.0 Introduced for E-Series