Command Reference Guide

1252 | Routing Information Protocol (RIP)
www.dell.com | support.dell.com
Command
History
Usage
Information
If the timers on one router are changed, the timers on all routers in the RIP domain must also
be synchronized.
version
c e s
Specify either RIP version 1 or RIP version 2.
Syntax
version {1 | 2}
To return to the default version setting, enter
no version.
Parameters
Default
The FTOS sends RIPv1 and receives RIPv1 and RIPv2.
Command Modes
ROUTER RIP
Command
History
Related
Commands
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
1
Enter the keyword 1 to specify RIP version 1.
2
Enter the keyword 2 to specify RIP version 2.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
ip rip receive version Set the RIP version to be received on the interface.
ip rip send version Set the RIP version to be sent out the interface.