Command Reference Guide

1242 | Routing Information Protocol (RIP)
www.dell.com | support.dell.com
Syntax
ip split-horizon
To disable split-horizon, enter no ip split-horizon.
Defaults
Enabled
Command Modes
INTERFACE
Command
History
Related
Commands
maximum-paths
c e s
Set RIP to forward packets over multiple paths.
Syntax
maximum-paths number
To return to the default values, enter no maximum-paths.
Parameters
Defaults
4
Command Modes
ROUTER RIP
Command
History
Usage
Information
RIP supports a maximum of 16 ECMP paths.
neighbor
c e s
Define a neighbor router with which to exchange RIP information.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
ip poison-reverse Set the prefix for RIP routing updates.
number
Enter the number of paths.
Range: 1 to 16.
The default is 4 paths.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series