Command Reference Guide

Routing Information Protocol (RIP) | 1233

Routing Information Protocol (RIP)

Overview

Routing Information Protocol (RIP) is a Distance Vector routing protocol. FTOS supports

both RIP version 1 (RIPv1) and RIP version 2 (RIPv2) on all Dell Force10 platforms, as

indicated by the characters that appear under each of the command headings:

e E-Series,

c C-Series, s S-Series, or .

The FTOS implementation of RIP is based on IETF RFCs 2453 and RFC 1058. For more

information on configuring RIP, refer to

FTOS Configuration Guide.

Commands

The following commands enable you to configure RIP:

• auto-summary

• clear ip rip

• debug ip rip

• default-information originate

• default-metric

• description

• distance

• distribute-list in

• distribute-list out

• ip poison-reverse

• ip rip receive version

• ip rip send version

• ip split-horizon

• maximum-paths

• neighbor

Note: The C-Series platform supports RIP with FTOS version 7.6.1.0 and later. The

S-Series platform supports RIP with FTOS version 7.8.1.0 and later. Prior to 7.6.1.0,

only the E-Series platform supported RIP.