Command Reference Guide

Control and Monitoring | 117
Command Modes
EXEC
EXEC Privilege
Command
History
Example
(show processes
cpu)
FTOS#show processes cpu
CPU Statistics On CP Processor
===============================
CPU utilization for five seconds: 4%/2%; one minute: 2%; five minutes: 2%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY
Process
0xd02e4e8 1498633 89918 16666 3.00% 2.67% 2.67% 0
KP
0xd9d4c70 0 0 0 0.00% 0.00% 0.00% 0
tLogTask
0xd9cd200 0 0 0 0.00% 0.00% 0.00% 0
soc_dpc
0xd9bf588 0 0 0 0.00% 0.00% 0.00% 0
tARL
0xd9bd2f8 0 0 0 0.00% 0.00% 0.00% 0
tBCMlink
0xd9bb0e0 700 42 16666 0.00% 0.00% 0.00% 0
tBcmTask
0xd9798d0 106683 6401 16666 0.00% 0.00% 0.00% 0
tNetTask
0xd3368a0 0 0 0 0.00% 0.00% 0.00% 0
tWdbTask
0xd3329b0 166 10 16600 0.00% 0.00% 0.00% 0
tWdtTask
0xd32a8c8 102500 6150 16666 0.00% 0.00% 0.00% 0
tme
0xd16b1d8 12050 723 16666 0.00% 0.00% 0.00% 0
ipc
0xd1680c8 33 2 16500 0.00% 0.00% 0.00% 0
irc
0xd156008 116 7 16571 0.00% 0.00% 0.00% 0
RpmAvailMgr
0xd153ab0 216 13 16615 0.00% 0.00% 0.00% 0
ev
-more-
rp2 (OPTIONAL) Enter the keyword rp2 to view CPU usage of the
Route Processor 2.
Note: This option is supported on the E-Series only.
lp linecard [1-99] (OPTIONAL) Enter the keyword lp followed by the line card
number to display the CPU usage of that line card.
The optional 1-99 variable sets the number of tasks to display in
order of the highest CPU usage in the past five (5) seconds.
lp all (OPTIONAL) Enter the keyword lp all to view CPU utilization on
all active line cards.
lp summary (OPTIONAL) Enter the keyword lp summary to view a summary
of the line card CPU utilization.
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Modified: Added the lp all option
Version 6.5.1.0 Modified: The granularity of the output for rp1 and rp2 is changed. The the
output is now at the process level, so process-specific statistics are displayed.