Command Reference Guide

PIM-Sparse Mode (PIM-SM) | 1109
clear ip pim snooping tib
c e s
Clear tree information discovered by PIM-SM snooping from the PIM database.
Syntax
clear ip pim snooping
tib [vlan vlan-id] [group-address]
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
debug ip pim
c e s
View IP PIM debugging messages.
Syntax
debug ip pim
[bsr | events | group | packet [in | out] | register | state | timer [assert | hello | joinprune |
register]]
To disable PIM debugging, enter
no debug ip pim, or enter undebug all to disable all debugging.
Parameters
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
vlan vlan-id (OPTIONAL) Enter a VLAN ID to clear TIB information learned through
PIM-SM snooping about a specified VLAN. Valid VLAN IDs: 1 to 4094.
group-address (OPTIONAL) Enter a multicast group address in dotted decimal format
(A.B.C.D) to clear TIB information learned through PIM-SM snooping
about a specified multicast group.
Version 8.4.1.1 Introduced on E-Series ExaScale
Version 8.3.7.0 Introduced on S4810
show ip pim snooping tib Display TIB information learned through PIM-SM snooping.
bsr
(OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR
activities.
events
(OPTIONAL) Enter the keyword events to view PIM events.
group (OPTIONAL) Enter the keyword group to view PIM messages for a
specific group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets. Enter one
of the optional parameters
• in: to view incoming packets
• out: to view outgoing packets.
register
(OPTIONAL) Enter the keyword register to view PIM register address
in dotted decimal format (A.B.C.D).