Command Reference Guide

Open Shortest Path First (OSPFv2) | 1073
• Save passive-interface interface into the running configuration.
passive-interface default
• All present and future OSPF interface are marked as passive.
• Any adjacency are explicitly terminated from all OSPF interfaces.
• All previous
passive-interface interface commands are removed from the running
configuration.
• All previous
no passive-interface interface commands are removed from the
running configuration.
no passive-interface interface
• Remove the interface from the passive list.
• The ABR status for the router is updated.
• If
passive-interface default is specified, then save no passive-interface interface
into the running configuration.
No passive-interface default
• Clear everything and revert to the default behavior.
• All previously marked passive interfaces are removed.
• May update ABR status.
redistribute
c e s
Redistribute information from another routing protocol throughout the OSPF process.
Syntax
redistribute {connected | rip | static} [metric metric-value | metric-type type-value]
[
route-map map-name] [tag tag-value]
To disable redistribution, use the
no redistribute {connected | isis | rip | static} command.
Parameters
connected
Enter the keyword connected to specify that information from active
routes on interfaces is redistributed.
rip
Enter the keyword rip to specify that RIP routing information is
redistributed.
static
Enter the keyword static to specify that information from static routes is
redistributed.
metric metric-value (OPTIONAL) Enter the keyword metric followed by a number.
Range: 0 (zero) to 16777214.
metric-type type-value (OPTIONAL) Enter the keyword metric-type followed by one of the
following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2