Command Reference Guide

Control and Monitoring | 107
0 0 up AC
0 1 absent
Example
(show environment
stack-unit)
FTOS#show environment stack-unit 0
-- Unit Environment Status --
Unit Status Temp Voltage
---------------------------------------------------------------------------
0* online 49C ok
* Management Unit
show inventory (C-Series and E-Series)
c e
Display the chassis type, components (including media), FTOS version including hardware
identification numbers and configured protocols.
Syntax
show inventory [media slot]
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION
Command
History
Usage
Information
The show inventory media command provides some details about installed pluggable media
(SFP, XFP), as shown in the Example (show inventory media). Use the
show interfaces
command to get more details about installed pluggable media.
The display output might include a double asterisk (**) next to the SFMs, for example:
...
0 CC-E-SFM ** 0004875 7490007411 A
1 CC-E-SFM ** 0004889 7490007411 A
...
The double asterisk generally indicates the SFM’s frequency capabilities, indicating either
that they are operating at 125 MHz or that the frequency capability, which is stored in an
EPROM, cannot be determined.
media slot (OPTIONAL) Enter the keyword media followed by the slot number.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Output expanded to include SFP+ media in C-Series.
Version 7.7.1.0 Vendor field removed from output of show inventory media.
Version 7.5.1.0 Introduced on C-Series and expanded to include transceiver media
Version 6.2.1.0 Expanded to include Software Protocol Configured field on E-Series
Version 5.3.1.0 Introduced on E-Series