Command Reference Guide

1040 | Object Tracking
www.dell.com | support.dell.com
First-hop interface is GigabitEthernet 13/2
Tracked by:
VRRP GigabitEthernet 7/30 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:30
First-hop interface is GigabitEthernet 13/2
Tracked by:
VRRP GigabitEthernet 7/30 IPv6 VRID 1
Example
(brief)
FTOS#show track ipv6 route brief
ResId Resource Parameter State LastChange
2 IPv6 route metric threshold 2040::/64 Up 00:02:36
3 IPv6 route reachability 2050::/64 Up 00:02:36
track interface ipv6 routing
c e s
Configure object tracking on the routing status of an IPv6 Layer 3 interface.
Syntax
track object-id interface interface ipv6 routing
To return to the default setting, enter no track object-id.
Table 36-3. Command Example Description: show track ipv6 route
show track ipv6
route Output Description
Track object-id Displays the number of the tracked object.
Interface type slot/port
IP route ip-address
IPv6 route ipv6-address
Displays the interface type and slot/port number or address of the
IPv4/IPv6 route that is being tracked.
object is Up/Down Up/Down state of tracked object; for example, IPv4 interface, reachability or
metric threshold of an IP route.
number changes,
last change time
Number of times that the state of the tracked object has changed and the time since
the last change in hours:minutes:seconds
First hop interface Displays the type and slot/port number of the first-hop interface of the tracked
route.
Tracked by Client that is tracking an object’s state; for example, VRRP.
Table 36-4. Command Example Description: show track ipv6 route brief
show track ipv6
route brief Output Description
ResID Number of the tracked object
Resource Type of tracked object
Parameter Detailed description of the tracked object
State Up or Down state of the tracked object
Last Change Time since the last change in the state of the tracked object