Command Reference Guide

1032 | Object Tracking
www.dell.com | support.dell.com
Example
(brief)
FTOS>show track brief
ResId Resource Parameter State LastChange
1 IP route reachability 10.16.0.0/16 Up 00:01:08
2 Interface line-protocol Ethernet0/2 Down 00:05:00
3 Interface ip routing VLAN100 Up 01:10:05
threshold metric
c e s
Configure the metric threshold used to determine the UP and/or DOWN state of a tracked IPv4 or IPv6
route.
Syntax
threshold metric {up number | down number}
To return to the default setting, enter no threshold metric {up number | down number}.
Parameters
Defaults
None
Interface type slot/port
IP route ip-address
IPv6 route ipv6-address
Displays the interface type and slot/port number or address of the
IPv4/IPv6 route that is being tracked.
object is Up/Down Up/Down state of tracked object; for example, IPv4 interface, reachability or
metric threshold of an IP route.
number changes,
last change time
Number of times that the state of the tracked object has changed and the time since
the last change in hours:minutes:seconds
First hop interface Displays the type and slot/port number of the first-hop interface of the tracked
route.
Tracked by Client that is tracking an object’s state; for example, VRRP.
Table 36-1. Command Example Description: show track
Table 36-2. Command Example Description: show track brief
show track Output Description
ResID Number of the tracked object
Resource Type of tracked object
Parameter Detailed description of the tracked object
State Up or Down state of the tracked object
Last Change Time since the last change in the state of the tracked object
object-id
Enter the ID number of the tracked object. Range: 1 to 65535.
up number
Enter a number for the UP threshold to be applied to the scaled metric of an IPv4 or
IPv6 route.
Default UP threshold: 254. The routing state is UP if the scaled route metric is less
than or equal to the UP threshold.
down number
Enter a number for the DOWN threshold to be applied to the scaled metric of an IPv4
or IPv6 route
Default DOWN threshold: 255. The routing state is DOWN if the scaled route metric
is greater than or equal to the DOWN threshold.