Specifications

Installing the S25P System 35
Networks cannot accept responsibility for any failure to satisfy the protection requirements resulting from
a non-recommended modification of this product, including the fitting of non-Force10 option cards.
This product has been tested and found to comply with the limits for Class A Information Technology
Equipment according to CISPR 22/European Standard EN 55022. The limits for Class A equipment were
derived for commercial and industrial environments to provide reasonable protection against interference
with licensed communication equipment. .
European Community Contact
Force10 Networks, EMEA - Central
Dahlienweg 19
66265 Heusweiler
Germany
http://www.force10networks.com/german/
Tel: [phone]
Email: EMEA Central Sales
Japan: VCCI Compliance for Class A Equipment
This is Class A product based on the standard of the Voluntary Control Council For Interference by
Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio
disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.
Korea (MIC certification)
Attention: This is a Class A product. In a domestic environment, this device may cause radio interference, in which
case, the user may be required to take adequate measures.
Danger: AC Power cords are for use with Force10 Networks equipment only. Do not use Force10
Networks AC power cords with any unauthorized hardware.