Reference Guide

Object Tracking | 989
show running-config track
c e s
Display the current configuration of tracked objects.
Syntax
show running-config track [object-id]
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
Example
Command Example: show running-config track
Command Example: show running-config track object-id
object-id
(OPTIONAL) Display information on the specified tracked object. Range: 1
to 65535.
Version 8.4.1.0 Introduced
show track Display information about tracked objects, including configuration, current
state, and clients which track the object.
track interface ip routing Configure object tracking on the routing status of an IPv4 Layer 3
interface.
track interface line-protocol Configure object tracking on the line-protocol state of a Layer 2 interface.
track ip route metric threshold Configure object tracking on the threshold of an IPv4 route metric.
track ip route reachability Configure object tracking on the reachability of an IPv4 route.
FTOS#show running-config track
track 1 ip route 23.0.0.0/8 reachability
track 2 ipv6 route 2040::/64 metric threshold
delay down 3
delay up 5
threshold metric up 200
track 3 ipv6 route 2050::/64 reachability
track 4 interface GigabitEthernet 13/4 ip routing
track 5 ip route 192.168.0.0/24 reachability vrf red
track resolution ip route isis 20
track resolution ip route ospf 10
FTOS#show running-config track 300
track 300 ip route 10.0.0.0/8 metric threshold
delay down 3
delay up 5
threshold metric up 100