Reference Guide

Multicast Source Discovery Protocol (MSDP) | 935
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
Figure 33-1. show ip msdp peer Command Example
Example 2
Figure 33-2. show ip msdp sa-cache Command Example
Example 3
Figure 33-3. show ip msdp summary Command Example
show ip msdp sa-cache rejected-sa
e
Display the rejected SAs in the SA cache.
Syntax
show ip mdsp sa-cache rejected-sa
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Version 6.2.1.1 Introduced
FTOS#show ip msdp peer 100.1.1.1
Peer Addr: 100.1.1.1
Local Addr: 100.1.1.2(639) Connect Source: none
State: Established Up/Down Time: 00:00:08
Timers: KeepAlive 60 sec, Hold time 75 sec
SourceActive packet count (in/out): 0/0
SAs learned from this peer: 0
SA Filtering:
Input (S,G) filter: none
Output (S,G) filter: none
FTOS#
FTOS#show ip msdp sa-cache
MSDP Source-Active Cache - 1 entries
GroupAddr SourceAddr RPAddr LearnedFrom Expire UpTime
224.1.1.1 172.21.220.10 172.21.3.254 172.21.3.254 102 00:02:52
FTOS#
FTOS#show ip msdp summary
Peer Addr Local Addr State Source SA Up/Down Description
72.30.1.2 72.30.1.1 Established none 0 00:00:03 peer1
72.30.2.2 72.30.2.1 Established none 0 00:00:03 peer2
72.30.3.2 72.30.3.1 Established none 0 00:00:02 test-peer-3
FTOS#
Version 7.4.1.0 Introduced