Reference Guide

920 | Multicast Listener Discovery (MLD)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 32-1. show ipv6 mld groups Command Example
show ipv6 mld interface
e
View the configured MDL interfaces.
Syntax
show ipv6 mld interface [interface]
explicit Enter this keyword to display explicit tracking information.
link-local Enter this keyword to display link-local groups.
group-address Enter the group address for which you want to display information.
interface interface
Enter the keyword interface followed by the interface type.
detail View detailed group information.
summary View a summary of group information.
Version 7.4.1.0 Introduced
FTOS#show ipv6 mld groups vlan 100 link-local ?
detail Detailed information
| Pipe through a command
<cr>
===========================================================================
show ipv6 mld groups explicit
Interface GigabitEthernet 2/14, Group ff02::1:ff00:0
Reporter fe80::200:ff:fe00:0
Uptime 00:00:19, Expires in 00:04:00
Mode EXCLUDE
Interface GigabitEthernet 2/14, Group ff02::1:ff00:5
Reporter fe80::200:ff:fe00:0
Uptime 00:00:19, Expires in 00:04:00
Mode EXCLUDE
Interface GigabitEthernet 2/14, Group ff3e:100::4000:1
Reporter fe80::200:ff:fe00:0
Uptime 00:00:16, Expires in 00:04:03
Mode INCLUDE
165:87:32::8
165:87:32::9
165:87:32::a
Interface GigabitEthernet 2/14, Group ff3e:100::4000:2
Reporter fe80::200:ff:fe00:0
Uptime 00:00:16, Expires in 00:04:03
Mode INCLUDE
165:87:32::8
165:87:32::9
165:87:32::a
[output omitted]