Reference Guide

Link Layer Detection Protocol (LLDP) | 899
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command
History
advertise management
c e s
Advertise management TLVs (Type, Length, Value).
Syntax
advertise management -tlv {system-capabilities | system-description | system-name}
To remove advertised management TLVs, use the no advertise management -tlv
{system-capabilities | system-description | system-name} command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-lldp)
Command
History
Usage
Information
All three command options — system-capabilities, system-description, and system-name}
—-can be invoked individually or together, in any sequence.
clear lldp counters
c e s
Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical
interface.
Syntax
clear lldp counters interface
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series
system-capabilities Enter the keyword system-capabilities to advertise the system
capabilities TLVs.
system-description Enter the keyword system-description to advertise the system
description TLVs.
system-name Enter the keyword system-description to advertise the system
description TLVs.
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series