Reference Guide

Layer 2 | 891
show vlan
c e s
Display the current VLAN configurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 30-11. show vlan Command Example
brief (OPTIONAL) Enter the keyword brief to display the following information:
• VLAN ID
• VLAN name (left blank if none is configured.)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Only
information on the VLAN specified is displayed.
name
vlan-name
(OPTIONAL) Enter the keyword
name followed by the name configured for the VLAN.
Only information on the VLAN named is displayed.
Version 7.8.1.0 Augmented to display PVLAN data for C-Series and S-Series; revised output to
include Description field to display user-entered VLAN description
Version 7.6.1.0 Introduced on S-Series; revised output to display Native VLAN
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
FTOS#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
* 1 Inactive
2 Active U Po1(Gi 13/0)
T Po20(Gi 13/6), Gi 13/25
T Gi 13/7
3 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/1
4 Active U Po2(Gi 13/2)
T Po20(Gi 13/6)
T Gi 13/7
5 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/3
6 Active U Po3(Gi 13/4)
T Po20(Gi 13/6)
T Gi 13/7
7 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/5
P 100 Active T Po1(Gi 0/1)
T Gi 0/2
C 101 Inactive T Gi 0/3
I 102 Inactive T Gi 0/4
FTOS#