Reference Guide

Layer 2 | 885
show mac cam
e
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
Syntax
show mac cam
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 30-9. show mac cam Command Example
show mac learning-limit
c e
Display MAC address learning limits set for various interfaces.
Syntax
show mac learning-limit [violate-action] [detail] [interface interface [vlan vlan-id]]
Parameters
pre-Version 6.2.1.1 Introduced on E-Series
Table 30-3. show mac cam Information
Field Description
Slot Lists the active line card slots.
Type Lists the type of line card present in the slot.
MAC CAM Size Displays the total CAM size available.
Note: A portion of the MAC CAM is used for system operations,
therefore adding the MAC FIB and MAC ACL will be less than the MAC
CAM.
MAC FIB Entries Displays the amount and percentage of CAM available for MAC addresses.
MAC ACL Entries Displays the amount and percentage of CAM available for MAC ACLs.
FTOS#show mac cam
Slot Type MAC CAM Size MAC FIB Entries MAC ACL Entries
0 E24PD 64K entries 48K (75%) 8K (25%)
2 E24PD2 128K entries 64K (50%) 32K (50%)
11 EX2YD 64K entries 16K (25%) 24K (75%)
Note: All CAM entries are per portpipe.
FTOS#
violate-action (OPTIONALY) Enter the keyword violate-action to display the MAC
learning limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning limit
in detail.