Reference Guide

884 | Layer 2
www.dell.com | support.dell.com
show mac accounting destination
e
Display destination counters for Layer 2 traffic (available on physical interfaces only).
Syntax
show mac accounting destination [mac-address vlan vlan-id] [interface interface
[mac-address vlan vlan-id] [vlan vlan-id]] [vlan vlan-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
MAC Accounting information can be accessed using SNMP via the FTOS Monitor MIB. For more
information on enabling SNMP, refer to Chapter 3 of the FTOS Configuration Guide.
Example
Figure 30-8. show mac accounting destination Command Example
Related
Commands
mac-address
(OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn format to
display information on that MAC address.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type,
slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display
the MAC address assigned to that VLAN.
Range: 1 to 4094.
pre-Version 6.2.1.1 Introduced on E-Series
Note: Currently, the FTOS MONITOR MIB does not return the MAC addresses in an
increasing order via SNMP. As a workaround, you can use the -C c option in snmpwalk or
snmpbulkwalk to access the FTOS MONITOR MIB. For example:
% snmpwalk -C c -v 2c -c public 133.33.33.131 enterprise.6027.3.3.3
FTOS-1#sh mac accounting destination interface gigabitethernet 2/1
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/0 1000 10000 5120000
00:44:00:00:00:01 Te 11/0 1000 10000 5120000
00:22:00:00:00:00 Te 11/0 1000 10000 5120000
00:44:00:00:00:02 Te 11/0 2000 10000 5120000
00:44:00:00:00:01 Te 11/0 2000 10000 5120000
FTOS-1#
show mac accounting access-list Display MAC access list configurations and counters (if configured).