Reference Guide

86 | Control and Monitoring
www.dell.com | support.dell.com
Example
Figure 5-5. Example of Logging on to an FTP Server
Related
Commands
ftp-server topdir
c e s
Specify the top-level directory to be accessed when an incoming FTP connection request is made.
Syntax
ftp-server topdir directory
Parameters
Defaults
The internal flash is the default directory.
Command Modes
CONFIGURATION
Command
History
Usage
Information
After you enable FTP server functions with the ftp-server enable command, Dell Force10 recommends
that you specify a top-level directory path. Without a top-level directory path specified, the FTOS
directs users to the flash directory when they log in to the FTP server.
Related
Commands
morpheus% ftp 10.31.1.111
Connected to 10.31.1.111.
220 FTOS (1.0) FTP server ready
Name (10.31.1.111:dch): dch
331 Password required
Password:
230 User logged in
ftp> pwd
257 Current directory is "flash:"
ftp> dir
200 Port set okay
150 Opening ASCII mode data connection
size date time name
-------- ------ ------ --------
512 Jul-20-2004 18:15:00 tgtimg
512 Jul-20-2004 18:15:00 diagnostic
512 Jul-20-2004 18:15:00 other
512 Jul-20-2004 18:15:00 tgt
226 Transfer complete
329 bytes received in 0.018 seconds (17.95 Kbytes/s)
ftp>
ftp-server topdir Set the directory to be used for incoming FTP connections to the E-Series.
ftp-server username Set a username and password for incoming FTP connections to the E-Series.
directory
Enter the directory path.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
ftp-server enable Enables FTP server functions on the E-Series.
ftp-server username Set a username and password for incoming FTP connections to the E-Series.