Reference Guide

Intermediate System to Intermediate System (IS-IS) | 833
Parameters
Defaults
manual, 30 seconds
Command Modes
ROUTER ISIS
Command
History
Usage
Information
The running router sets remaining time value to the current adjacency hold time. This can be
overridden by implementing this command.
Override the default restart-wait time by entering the no graceful-restart restart-wait command.
When restart-wait is disabled, the current adjacency hold time is used.
Be sure to set the t3 timer to adjacency on the restarting router when implementing this command. The
restarting router gets the remaining time value from its peer and adjusts its T3 value accordingly only
when you have configured graceful-restart t3 adjacency.
Related
Commands
graceful-restart restart-wait
e
Enable the Graceful Restart maximum wait time before a restarting peer comes up.
Be sure to set the t3 timer to adjacency on the restarting router when implementing this command.
Syntax
graceful-restart restart-wait seconds
To return to the default, use the no graceful-restart restart-wait command.
Parameters
Defaults
30 seconds
Command Modes
ROUTER ISIS
Command
History
Related
Commands
adjacency Enter the keyword adjacency so that the restarting router receives the
remaining time value from its peer and adjusts its T3 value
accordingly if user has configured this option.
manual
Enter the keyword manual to specify a time value that the restarting
router uses.
Range: 50-120 seconds
default: 30 seconds
Version 8.3.1.0 Introduced on the E-Series
graceful-restart restart-wait
Enable the Graceful Restart maximum wait time before a
restarting peer comes up.
seconds
Range: 5-300 seconds
Default: 30 seconds
Version 8.3.1.0 Introduced on the E-Series
graceful-restart t3
Configure the overall wait time before Graceful Restart is completed.