Reference Guide

Intermediate System to Intermediate System (IS-IS) | 829
Command
History
Related
Commands
distribute-list out
e
Suppress network prefixes from being advertised in outbound updates.
Syntax
distribute-list prefix-list-name out [connected | bgp as number | ospf process-id | rip | static]
To return to the default values, enter the no distribute-list prefix-list-name out [bgp as number
connected | ospf process-id | rip | static] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Usage
Information
You can assign a name to a routing process so a prefix list will be applied to only the routes derived
from the specified routing process.
Related
Commands
distribute-list redistributed-override
e
Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the
network.
Version 7.5.1.0 Introduced IPv6 ISIS support
Version 6.3.1.0 Introduced
distribute-list out Suppress networks from being advertised in updates.
redistribute Redistributes routes from one routing domain to another routing domain.
prefix-list-name
Specify the prefix list to filter prefixes in routing updates.
connected (OPTIONAL) Enter the keyword connected for directly connected routing
process.
ospf process-id (OPTIONAL) Enter the keyword ospf followed by the OSPF process-ID number.
Range: 1 to 65535
bgp as number
(OPTIONAL) Enter the BGP followed by the AS Number.
Range: 1 to 65535
rip (OPTIONAL) Enter the keyword rip for RIP routes.
static (OPTIONAL) Enter the keyword static for user-configured routing process.
Version 7.5.1.0 Introduced IPv6 ISIS support
Version 6.3.1.0 Introduced
distribute-list in Filters networks received in updates.
redistribute Redistributes routes from one routing domain to another routing domain.