Reference Guide

814 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
show ip bgp ipv6 unicast inconsistent-as
c e
View routes with inconsistent originating Autonomous System (AS) numbers, that is, prefixes that are
announced from the same neighbor AS but with a different AS-Path.
Syntax
show ip bgp ipv6 unicast inconsistent-as
Command Modes
EXEC
EXEC Privilege
Command
History
show ip bgp ipv6 unicast neighbors
c e
Allows you to view the information exchanged by BGP neighbors.
Syntax
show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length [advertised-routes |
dampened-routes | detail | flap-statistics | routes]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the
/x format.
Range: /0 to /128
The
:: notation specifies successive hexadecimal fields of zeros.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the routes
the neighbor sent.
dampened-routes (OPTIONAL) Enter the keyword dampened-routes to view information on
dampened routes from the BGP neighbor.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to view flap statistics on the
neighbor’s routes.
detail
(OPTIONAL) Display detailed neighbor information.
routes (OPTIONAL) Enter the keywords routes to view only the neighbor’s feasible
routes.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 7.5.1.0
Modified: Added
detail option; added information to output.
Version 7.4.1.0 Introduced on E-Series TeraScale