Reference Guide

806 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
neighbor route-map
c e
Apply an established route map to either incoming or outbound routes of a BGP neighbor or peer
group.
Syntax
neighbor ipv6-address | peer-group-name route-map map-name [in | out]
To remove the route map, use the no neighbor [ipv6-address | peer-group-name] route-map
map-name [in | out] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Usage
Information
When you apply a route map to outbound routes, only routes that match at least one section of the route
map are permitted.
If you identify a peer group by name, the peers in that peer group inherit the characteristics in the
Route map used in this command. If you identify a peer by IP address, the Route map overwrites either
the inbound or outbound policies on that peer.
neighbor route-reflector-client
c e
Configure a neighbor as a member of a route reflector cluster.
Syntax
neighbor ipv6-address| peer-group-name route-reflector-client
To indicate that the neighbor is not a route reflector client or to delete a route reflector configuration,
use the no neighbor ipv6-address | peer-group-name route-reflector-client command.
Parameters
Defaults
Not configured.
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format.
The
:: notation specifies successive hexadecimal fields of zeros.
peer-group-name
(OPTIONAL) Enter the name of the peer group.
map-name
Enter the name of an established route map.
If the Route map is not configured, the default is deny (to drop all routes).
in Enter the keyword in to filter inbound routes.
out Enter the keyword out to filter outbound routes.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format.
The
:: notation specifies successive hexadecimal fields of zeros.
peer-group-name
(OPTIONAL) Enter the name of the peer group.
All routers in the peer group receive routes from a route reflector.