Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 803
Defaults
Not configured.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
neighbor distribute-list
c e
Distribute BGP information via an established prefix list.
Syntax
neighbor [ipv6-address | peer-group-name] distribute-list prefix-list-name [in | out]
To delete a neighbor distribution list, use the no neighbor [ipv6-address | peer-group-name]
distribute-list prefix-list-name [in | out] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Usage
Information
Other BGP filtering commands include: neighbor filter-list and neighbor route-map.
Related
Commands
neighbor filter-list
c e
Configure a BGP filter based on the AS-PATH attribute.
Syntax
neighbor [ipv6-address | peer-group-name] filter-list aspath access-list-name [in | out]
To delete a BGP filter, use the no neighbor [ipv6-address | peer-group-name] filter-list aspath
access-list-name [in | out] command.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format.
The
:: notation specifies successive hexadecimal fields of zeros.
peer-group-name
Enter the name of the peer group to apply the distribute list filter to all routers
in the peer group.
prefix-list-name
Enter the name of an established prefix list.
If the prefix list is not configured, the default is permit (to allow all routes).
in Enter the keyword in to distribute only inbound traffic.
out Enter the keyword out to distribute only outbound traffic.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 7.4.1.0 Introduced on E-Series TeraScale
neighbor filter-list Assign a AS-PATH list to a neighbor or peer group.
neighbor route-map Assign a route map to a neighbor or peer group.