Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 787
show ip bgp ipv6 unicast neighbors
c e
Displays information on IPv6 unicast routes exchanged by BGP neighbors.
Syntax
show ip bgp ipv6 unicast neighbors [ipv4-neighbor-addr | ipv6-neighbor-addr]
[advertised-routes | dampened-routes | detail | flap-statistics | routes | received-routes
[network [network-mask]] | denied-routes [network [network-mask]]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
ipv6 unicast
Enter the
ipv6 unicast keywords to view information only related to IPv6
unicast routes.
ipv4-neighbor-addr |
ipv6-neighbor-addr
(OPTIONAL) Enter the IP address of the neighbor to view only BGP route
information exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the
routes the neighbor sent.
dampened-routes (OPTIONAL) Enter the keyword dampened-routes to view information on
dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific internal
information for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to view flap statistics on the
neighbor’s routes.
routes (OPTIONAL) Enter the keywords routes to view only the neighbor’s feasible
routes.
received-routes
[network
[
network-mask]
(OPTIONAL) Enter the keywords received-routes followed by either the
network address (in dotted decimal format) or the network mask (in slash prefix
format) to view all information received from neighbors.
Note: neighbor soft-reconfiguration inbound must be configured prior to
viewing all the information received from the neighbors.
denied-routes
[network
[
network-mask]
(OPTIONAL) Enter the keywords denied-routes followed by either the
network address (in dotted decimal format) or the network mask (in slash prefix
format) to view all information on routes denied via neighbor inbound filters.
Version 8.4.1.0 Added support for IPv4 multicast and IPv6 unicast address families
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S4810
Version 7.7.1.0 Introduced on C-Series
Version 7.5.1.0
Added
detail option and output now displays default MED value
Version 7.2.1.0 Added received and denied route options
Version 6.3.10 The output is changed to display the total number of advertised prefixes