Reference Guide

78 | Control and Monitoring
www.dell.com | support.dell.com
Usage
Information
This command clear alarms that are no longer active. If an alarm situation is still active, it is seen in the
system output.
clear command history
c e s
Clear the command history log.
Syntax
clear command history
Command Modes
EXEC Privilege
Command
History
Related
Commands
clear line
c e s
Reset a terminal line.
Syntax
clear line {line-number | aux 0 | console 0 | vty number}
Parameters
Command Modes
EXEC Privilege
Command
History
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
show command-history
Display a buffered log of all commands entered by all users along with a
time stamp.
line-number
Enter a number for one of the 12 terminal lines on the system.
Range: 0 to 11.
aux 0 Enter the keywords aux 0 to reset the Auxiliary port.
Note: This option is supported on E-Series only.
console 0 Enter the keyword console 0 to reset the Console port.
vty number
Enter the keyword vty followed by a number to clear a Terminal line.
Range: 0 to 9
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command