Reference Guide

736 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Command
History
.
Usage
Information
Enter ipv6 unicast to enter the BGP for IPv6 mode (CONF-ROUTER_BGPv6_AF).
aggregate-address
c e
Summarize a range of prefixes to minimize the number of entries in the routing table.
Syntax
aggregate-address ipv6-address prefix-length [advertise-map map-name] [as-set]
[attribute-map map-name] [summary-only] [suppress-map map-name]
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION-ROUTER-BGPV6-ADDRESS FAMILY
Command
History
Usage
Information
At least one of the routes included in the aggregate address must be in the BGP routing table for the
configured aggregate to become active.
Do not add the as-set parameter to the aggregate, if routes within the aggregate are constantly
changing as the aggregate will flap to keep track of the changes in the AS_PATH.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 6.5.1.0 Introduced on E-Series TeraScale
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the
/x format.
Range: /0 to /128
The
:: notation specifies successive hexadecimal fields of zeros
advertise-map
map-name
(OPTIONAL) Enter the keywords advertise-map followed by the name of a
configured route map to set filters for advertising an aggregate route.
as-set (OPTIONAL) Enter the keyword as-set to generate path attribute information and
include it in the aggregate.
AS_SET includes AS_PATH and community information from the routes included
in the aggregated route.
attribute-map
map-name
(OPTIONAL) Enter the keywords attribute-map followed by the name of a
configured route map to modify attributes of the aggregate, excluding AS_PATH
and NEXT_HOP attributes.
summary-only (OPTIONAL) Enter the keyword summary-only to advertise only the aggregate
address. Specific routes will not be advertised.
suppress-map
map-name
(OPTIONAL) Enter the keywords suppress-map followed by the name of a
configured route map to identify which more-specific routes in the aggregate are
suppressed.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale