Reference Guide

IPv6 Basics | 727
show ipv6 interface
c e s
Display the status of interfaces configured for IPv6.
Syntax
show ipv6 interface interface [brief] [configured] [gigabitethernet slot | slot/port] [linecard
slot-number] [loopback interface-number] [managementethernet slot/port] [port-channel
number] [tengigabitethernet slot | slot/port] [vlan vlan-id]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The Management port is enabled by default (no shutdown). If necessary, use the ipv6 address
command to assign an IPv6 address to the Management port.
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Loopback interface, enter the keyword
Loopback followed by a
number from 0 to 16383.
• For the Null interface, enter the keyword
null followed by zero (0).
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
brief
(OPTIONAL) View a summary of IPv6 interfaces.
configured
(OPTIONAL) View information on all IPv6 configured interfaces
gigabitethernet
(OPTIONAL) View information for an IPv6 gigabitethernet interface.
linecard slot-number
(OPTIONAL) View information for a specific IPv6 linecard or S-Series
stack-unit
Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.
Range: 0-7 for C-Series
Range 0-7 for S-Series
managementethernet
slot/port
(OPTIONAL) View information on an IPv6 Management port. Enter the
slot number (0-1) and port number zero (0).
loopback
(OPTIONAL) View information for IPv6 loopback interfaces.
port-channel
(OPTIONAL) View information for IPv6 port channels.
tengigabitethernet
(OPTIONAL) View information for an IPv6 tengigabitethernet interface.
vlan
(OPTIONAL) View information for IPv6 VLANs.
Version 8.4.2.1 Introduced on S-Series
Version 8.2.1.0 Introduced on E-Series ExaScale.
Support for the
managementethernet slot/port parameter was added.
Version 7.8.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series TeraScale