Reference Guide

72 | BOOT_USER Mode
www.dell.com | support.dell.com
show interface management ethernet
c es
Display the IP address configured for the Management interface.
Syntax
show interface management ethernet
Command Modes
BOOT_USER
Command
History
Example
Figure 4-9. show interface management ethernet Command Example
On the S-Series, the output of this command includes the MAC address and port number of the
assigned management port.
Example
Figure 4-10. show interface management ethernet Command Example
Related
Commands
Version 7.8.1.0 Introduced on S-Series
BOOT_USER # show interfaces management ethernet
Management ethernet IP address: 10.16.1.181/24
BOOT_USER #
BOOT_USER # show interface management ethernet
Management ethernet IP address: 10.16.1.181/24
Management ethernet MAC address: 00:01:e8:43:13:16
Management ethernet port number: 1
BOOT_USER #
interface management ethernet ip address
Assign an IP address to the Management Ethernet
interface.
interface management port config Configure speed, duplex, and negotiation settings for the
management interface.