Reference Guide

IPv6 Access Control Lists (IPv6 ACLs) | 709

Example

The following example shows the output shown when using the test cam-usage command.

Figure 25-8. Command Example: test cam-usage (C-Series)

FTOS#test cam-usage service-policy input LauraMapTest linecard all

------------------------------------------------------------------------------------------

2 | 1 | IPv4Flow | 232 | 0 | Allowed

2 | 1 | IPv6Flow | 0 | 0 | Allowed

4 | 0 | IPv4Flow | 232 | 0 | Allowed

4 | 0 | IPv6Flow | 0 | 0 | Allowed

FTOS#

FTOS#test cam-usage service-policy input LauraMapTest linecard 4 port-set 0

------------------------------------------------------------------------------------------

4 | 0 | IPv4Flow | 232 | 0 | Allowed

4 | 0 | IPv6Flow | 0 | 0 | Allowed

FTOS#

FTOS#test cam-usage service-policy input LauraMapTest linecard 2 port-set 1

------------------------------------------------------------------------------------------

2 | 1 | IPv4Flow | 232 | 0 | Allowed

2 | 1 | IPv6Flow | 0 | 0 | Allowed

FTOS#

Table 25-3. Output Explanations: test cam-usage

Term Explanation

Linecard

Lists the line card or line cards that are checked. Entering

all shows

the status for line cards in the chassis

Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are checked.

Entering all shows the status for line cards and port-pipes in the

chassis.

CAM Partition Shows the CAM profile of the CAM

Available CAM Identifies the amount of CAM space remaining for that profile

Estimated CAM per Port Estimates the amount of CAM space the listed policy will require.

Status Indicates whether or not the policy will be allowed in the CAM