Reference Guide

IPv4 Routing | 661
Related
Commands
show ip cam linecard
c e
View CAM entries for a port pipe on a line card.
Syntax
show ip cam linecard number port-set pipe-number [ip-address mask [longer-prefixes] |
index index-number | summary | vrf vrf instance]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Flags Classifies the entry as one of the following:
• perm - the entry was manually configured and will not time out
• temp - the entry was learned and will time out after 72 hours of inactivity.
Also included in the flag is an indication of the validity of the route:
• ok - the entry is valid.
• ex - the entry expired.
• ?? - the entry is suspect.
TTL Displays the amount of time until the entry ages out of the cache. For dynamically
learnt entries only.
Type Displays IP as the type of entry.
Address Displays the IP address(es) assigned to the host.
Table 24-6. show hosts Command Example Fields (continued)
Field Description
traceroute View DNS resolution
ip host Configure a host.
number
Enter the number of the line card.
Range: 0 to 13 on a E1200/1200i, 0 to 6 on a E600600i, and 0 to 5 on a E300.
pipe-number
Enter the number of the line card’s port-pipe.
Range: 0 to 1
ip-address mask
[
longer-prefix]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route
only.
Enter the keyword
longer-prefixes to view routes with a common prefix.
index
index-number
(OPTIONAL) Enter the keyword
index followed by the CAM index number.
Range: depends on CAM size
summary (OPTIONAL) Enter the keyword summary to view a table listing route prefixes
and the total number of routes that can be entered into the CAM.
vrf instance (OPTIONAL) E-Series Only: Enter the keyword vrf following by the VRF Instance
name to show CAM information as it applies to that VRF instance.
Version 8.1.1.2 E-Series ExaScale E600i supported
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.9.1.0 Introduced VRF on the E-Series