Reference Guide

660 | IPv4 Routing
www.dell.com | support.dell.com
Syntax
show arp retries
Command Modes
EXEC
EXEC Privilege
Command
History
Related
Commands
show hosts
c e s
View the host table and DNS configuration.
Syntax
show hosts
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 24-9. show hosts Command Example
Version 8.3.1.0 Introduced
arp retries Set the number of ARP retries in case the system does not receive an ARP reply
in response to an ARP request.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Table 24-6. show hosts Command Example Fields
Field Description
Default domain... Displays the domain name (if configured).
Name/address lookup... States if DNS is enabled on the system.
If DNS is enabled, the Name/Address lookup is domain service.
If DNS is not enabled, the Name/Address lookup is static mapping.
Name servers are... Lists the name servers, if configured.
Host Displays the host name assigned to the IP address.
FTOS#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
FTOS#