Reference Guide

IPv4 Routing | 659
Figure 24-7. show arp cpu cp Command Example
Figure 24-8. show arp summary Command Example
Related
Commands
show arp retries
c e s
Display the configured number of ARP retries.
Table 24-4. show arp Command Example Fields
Row Heading Description
Protocol Displays the protocol type.
Address Displays the IP address of the ARP entry.
Age(min) Displays the age in minutes of the ARP entry.
Hardware Address Displays the MAC address associated with the ARP entry.
Interface Displays the first two letters of the interfaces type and the slot/port
associated with the ARP entry.
VLAN Displays the VLAN ID, if any, associated with the ARP entry.
CPU Lists which CPU the entries are stored on.
Table 24-5. show arp summary Command Example Fields
Row Heading Description
Total Entries Lists the total number of ARP entries in the ARP table.
Static Entries Lists the total number of configured or static ARP entries.
Dynamic Entries Lists the total number of learned or dynamic ARP entries.
CPU Lists which CPU the entries are stored on.
FTOS#sho arp cpu cp
Protocol Address Age(min) Hardware Address Interface VLAN CPU
--------------------------------------------------------------------------------
Internet 10.1.2.206 0 00:a0:80:00:15:b8 Ma 0/0 - CP
Internet 182.16.1.20 0 00:30:19:24:2d:70 Gi 8/0 - CP
Internet 100.10.10.10 0 00:30:19:4f:d3:80 Gi 8/12 - CP
Internet 10.1.2.209 12 00:a0:80:00:12:6c Ma 0/0 - CP
FTOS#
FTOS# show arp summary
Total Entries Static Entries Dynamic Entries CPU
------------------------------------------------------
83 0 83 CP
FTOS
ip local-proxy-arp Enable/disable Layer 3 communication in secondary VLANs.
switchport mode
private-vlan
Set the PVLAN mode of the selected port.