Reference Guide

Interfaces | 561

Interfaces

Overview

This chapter defines interface commands and is divided into the following sections:

• Basic Interface Commands

• Port Channel Commands

• Time Domain Reflectometer (TDR)

• UDP Broadcast

The symbols c e s under command headings indicate which Dell Force10 platforms — C-Series,

E-Series, or S-Series, respectively — support the command.

Although all interfaces are supported on E-Series ExaScale, some interface functionality is supported

on E-Series ExaScale ex with FTOS 8.2.1.0. and later. When this is the case that is noted in the

command history.

Basic Interface Commands

The following commands are for physical, Loopback, and Null interfaces:

• clear counters

• clear dampening

• cx4-cable-length

• dampening

• description

• disable-on-sfm-failure

• duplex (Management)

• duplex (10/100 Interfaces)

• flowcontrol

• interface

• interface loopback

• interface ManagementEthernet

• interface null

• interface range

• interface range macro (define)

• interface range macro name

• interface vlan

• ipg (Gigabit Ethernet interfaces)