Reference Guide

540 | High Availability (HA)
www.dell.com | support.dell.com
Related
Commands
redundancy reset-counter
e
Reset failover counter and timestamp information displayed in the show redundancy command output.
Syntax
redundancy reset-counter
Defaults
Not configured
Command Modes
EXEC Privilege
Command
History
redundancy sfm standby
c
Place the SFM in an offline state.
Syntax
redundancy sfm standby
Place the SFM in an online state using the command no redundancy sfm standby command.
Defaults
The SFM is online by default.
Command Modes
CONFIGURATION
Command
History
Command
History
Usage
Information
When a secondary RPM with logical SFM is inserted or removed, the system must add or remove the
backplane links to the switch fabric trunk. To avoid traffic disruption, use this command when the
secondary RPM is inserted. When this command is executed, the logical SFM on the standby RPM is
immediately taken offline and the SFM state is set as “standby”.
show lacp Display the lacp configuration
show redundancy Display the current redundancy configuration.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on E-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.5.1.0 Introduced on C-Series Only
Note: This command could affect traffic when taking the secondary SFM offline.