Reference Guide

FTOS Service Agent | 523

test-limit

c e

Set the number of times that the test list should be executed.

Syntax

test -limit number

Parameters

Default

none. If the test-limit number is removed or not configured, there is no limit for how many times to

test for the condition.

Command Mode

conf-callhome-policy

Command

History

Commands

number

Set the number of times the test list matches that should be attempted.

Range: 0–256

Version 7.8.1.0 Introduced on C-Series and E-Series

dampen Set a delay before sampling for a test condition again after it has been matched.

test-condition

(comparing samples)

Configure an action to collect and compare multiple samples of a statistic.

policy Create a policy with a name and enter config-callhome-policy-name mode.

policy-test-list Name a policy test list and enter the config-callhome-actionlist-name mode.

sample-rate Set the sampling interval for how often to execute the configured test condition.