Reference Guide

FTOS Service Agent | 517
smtp server-address
c e
Identify the local SMTP (Simple Mail Transfer Protocol) server from which FTSA email messages
will be forwarded.
Syntax
smtp server-address server-address [smtp-port port number]
To remove the SMTP address, use the no smtp server-address command. This action will disable
email messaging until you enter a new SMTP server address.
Parameters
Defaults
SMTP port = 25
Command Mode
CONFIGURATION (conf-callhome)
Command
History
Usage
Information
The switch only plays the part of an SMTP client to send email messages to the SMTP server
designated here. This SMTP server is required in order to receive the email messages and forward
them to local and remote designated recipients. The default port number on an SMTP server is 25. If a
host name is given (instead of an IP address), DNS should be enabled to resolve the host name.
Related
Commands
server-address server address Enter the keyword server-address followed by the SMTP
server address, such as smtp.yourco.com. The domain name you
specify can be resolved into an IPv4 or IPv6 address.
smtp-port port number Optionally, enter the keyword smtp-port followed by the
SMTP port number.
Range: 0 to 65535
Default:
25
Version 7.6.1.0 Introduced on C-Series
Version 6.3.1.0 Introduced for E-Series
admin-email Specify the Administrator’s email address.
enable Enable FTSA email messages for the selected recipient.
enable-all Enable FTSA email messages for all designated recipients.