Reference Guide

FTOS Service Agent | 499
If the debug command has spaces, such as debug ip bgp events, put the words following debug in
double quotes.
Related
Commands
seq cli-show
c e
Configure an action to collect the output of the designated show command a designated number of
times at a designated time interval.
Syntax
seq number cli-show command repeat number delay seconds
Parameters
Defaults
None
Command Modes
CALL-HOME ACTION-LIST
Command
History
Usage
If the command has spaces. such as show processes cpu time, put the words following show in
double quotes, as shown in the following example.
Related
Commands
action-list Specify an action list for the associated policy and enter the
conf-call-home-actionlist-name mode.
seq number Use the keyword seq followed by a number that FTOS uses to execute the list of
actions in numerical order.
cli-show
show-command
Enter the keyword cli-show, followed by a show command.
Range: 1-100(max 100 chars including quotes)
repeat number Enter the keyword repeat, followed by the number of times that the output of the
designated
show command should be collected.
Range: 1–10 (number of times to collect output)
delay seconds Enter the keyword delay, followed by the interval, in number of seconds, to wait in
collecting instances of the output of the designated
show command.
Range: 1–120 (number of seconds to wait between collections)
Version 8.2.1.0
Added keyword
seq.
Version 7.8.1.0 Introduced on C-Series and E-Series
action-list Specify an action list for the associated policy and enter the
conf-call-home-actionlist-name mode.