Reference Guide

File Management | 49
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
E-Series Example
Command output example (Partial) on E-Series: show sfm
number
Enter a number to view information on that SFM.
Range: 0 to 8.
all (OPTIONAL) Enter the keyword all to view a table with information on all present SFMs.
brief (OPTIONAL) Enter the keyword brief to view a list with SFM status.
Note: The brief option is not available on C-Series.
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
show sfm Command Output Fields
Field Description
Switch Fabric State: States that the Switch Fabric is up (8 SFMs are online and operating).
Status Displays the SFM’s active status.
Card Type States the type of SFM.
Up Time Displays the number of hours and minutes since the RPM’s last reboot.
Temperature Displays the temperature of the RPM.
Minor alarm status if temperature is over 65° C.
Power Status Displays power status: absent, down, or up
Serial Num Displays the line card serial number.
Part Num Displays the line card part number.
Vendor ID Displays an internal code, which specifies the manufacturing vendor.
Date Code Displays the line card’s manufacturing date.
Country Code Displays the country of origin.
01 = USA
FTOS#show sfm
Switch Fabric State: up
-- SFM card 0 --
Status : active
Card Type : SFM - Switch Fabric Module
Up Time : 37 min, 24 sec
Temperature : 49C
Power Status : PEM0: absent or down PEM1: up
Serial Number : 0018102
Part Number : 7520012900 Rev 02
Vendor Id : 02
Date Code : 06182004
Country Code : 01