Reference Guide

48 | File Management
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
Example
Command output example (partial): show running-config
Example
Command output example: show running-config
Usage
Information
The status option enables you to display the size and checksum of the running configuration and the
startup configuration.
show sfm
c e
View the current SFM status.
Syntax
show sfm [number [brief] | all]
• snmp for the current SNMP configuration
•
spanning-tree for the current spanning tree configuration
•
static for the current static route configuration
•
tacacs+ for the current TACACS+ configuration
•
tftp for the current TFTP configuration
•
trace-group for the current trace-group configuration
•
trace-list for the current trace-list configuration
•
users for the current users configuration
•
wred-profile for the current wred-profile configuration
configured
(OPTIONAL) Enter the keyword configuration to display line card
interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for the
running configuration and the start-up configuration.
Version 7.8.1.0 Added hardware-monitor option
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Expanded to include last configuration change and start-up last updated (date and time)
and who made the change
Version 6.5.4.0 Added status option
FTOS#show running-config
Current Configuration ...
! Version 7.4.1.0
! Last configuration change at Tue Apr 10 17:43:38 2007 by admin
! Startup-config last updated at Thu Mar 29 02:35:08 2007 by default
!
boot system rpm0 primary flash://FTOS-EF-7.4.1.0.bin
boot system rpm0 secondary flash://FTOS-EF-6.3.1.2.bin
boot system rpm0 default flash://FTOS-EF-6.5.1.8.bin
!
...
FTOS#show running-config status
running-config checksum 0xB4B9BF03
startup-config checksum 0x8803620F
FTOS#